working z predoslych hodin

2026-03-09 14:04:31 +01:00
commit 7546081aaf
15 changed files with 1960 additions and 0 deletions
--- a/project_3_nzio/project_3_nzio.srcs/constrs_1/imports/Downloads/Basys-3-Master.xdc
+++ b/project_3_nzio/project_3_nzio.srcs/constrs_1/imports/Downloads/Basys-3-Master.xdc
@@ -0,0 +1,159 @@
+## This file is a general .xdc for the Basys3 rev B board
+## To use it in a project:
+## - uncomment the lines corresponding to used pins
+## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project
+
+## Clock signal
+set_property -dict { PACKAGE_PIN W5   IOSTANDARD LVCMOS33 } [get_ports CLK]
+create_clock -add -name sys_clk_pin -period 10.00 -waveform {0 5} [get_ports CLK]
+
+
+## Switches
+#set_property -dict { PACKAGE_PIN V17   IOSTANDARD LVCMOS33 } [get_ports {CLK}]
+set_property -dict { PACKAGE_PIN V16   IOSTANDARD LVCMOS33 } [get_ports {CE}]
+#set_property -dict { PACKAGE_PIN W16   IOSTANDARD LVCMOS33 } [get_ports {sw[2]}]
+#set_property -dict { PACKAGE_PIN W17   IOSTANDARD LVCMOS33 } [get_ports {sw[3]}]
+#set_property -dict { PACKAGE_PIN W15   IOSTANDARD LVCMOS33 } [get_ports {sw[4]}]
+#set_property -dict { PACKAGE_PIN V15   IOSTANDARD LVCMOS33 } [get_ports {sw[5]}]
+#set_property -dict { PACKAGE_PIN W14   IOSTANDARD LVCMOS33 } [get_ports {sw[6]}]
+#set_property -dict { PACKAGE_PIN W13   IOSTANDARD LVCMOS33 } [get_ports {sw[7]}]
+#set_property -dict { PACKAGE_PIN V2    IOSTANDARD LVCMOS33 } [get_ports {sw[8]}]
+#set_property -dict { PACKAGE_PIN T3    IOSTANDARD LVCMOS33 } [get_ports {sw[9]}]
+#set_property -dict { PACKAGE_PIN T2    IOSTANDARD LVCMOS33 } [get_ports {sw[10]}]
+#set_property -dict { PACKAGE_PIN R3    IOSTANDARD LVCMOS33 } [get_ports {sw[11]}]
+#set_property -dict { PACKAGE_PIN W2    IOSTANDARD LVCMOS33 } [get_ports {sw[12]}]
+#set_property -dict { PACKAGE_PIN U1    IOSTANDARD LVCMOS33 } [get_ports {sw[13]}]
+#set_property -dict { PACKAGE_PIN T1    IOSTANDARD LVCMOS33 } [get_ports {sw[14]}]
+#set_property -dict { PACKAGE_PIN R2    IOSTANDARD LVCMOS33 } [get_ports {sw[15]}]
+
+
+## LEDs
+set_property -dict { PACKAGE_PIN U16   IOSTANDARD LVCMOS33 } [get_ports {LEDS[0]}]
+set_property -dict { PACKAGE_PIN E19   IOSTANDARD LVCMOS33 } [get_ports {LEDS[1]}]
+set_property -dict { PACKAGE_PIN U19   IOSTANDARD LVCMOS33 } [get_ports {LEDS[2]}]
+set_property -dict { PACKAGE_PIN V19   IOSTANDARD LVCMOS33 } [get_ports {LEDS[3]}]
+#set_property -dict { PACKAGE_PIN W18   IOSTANDARD LVCMOS33 } [get_ports {led[4]}]
+#set_property -dict { PACKAGE_PIN U15   IOSTANDARD LVCMOS33 } [get_ports {led[5]}]
+#set_property -dict { PACKAGE_PIN U14   IOSTANDARD LVCMOS33 } [get_ports {led[6]}]
+#set_property -dict { PACKAGE_PIN V14   IOSTANDARD LVCMOS33 } [get_ports {led[7]}]
+#set_property -dict { PACKAGE_PIN V13   IOSTANDARD LVCMOS33 } [get_ports {led[8]}]
+#set_property -dict { PACKAGE_PIN V3    IOSTANDARD LVCMOS33 } [get_ports {led[9]}]
+#set_property -dict { PACKAGE_PIN W3    IOSTANDARD LVCMOS33 } [get_ports {led[10]}]
+#set_property -dict { PACKAGE_PIN U3    IOSTANDARD LVCMOS33 } [get_ports {led[11]}]
+#set_property -dict { PACKAGE_PIN P3    IOSTANDARD LVCMOS33 } [get_ports {led[12]}]
+#set_property -dict { PACKAGE_PIN N3    IOSTANDARD LVCMOS33 } [get_ports {led[13]}]
+#set_property -dict { PACKAGE_PIN P1    IOSTANDARD LVCMOS33 } [get_ports {led[14]}]
+#set_property -dict { PACKAGE_PIN L1    IOSTANDARD LVCMOS33 } [get_ports {led[15]}]
+
+
+##7 Segment Display
+#set_property -dict { PACKAGE_PIN W7   IOSTANDARD LVCMOS33 } [get_ports {seg[0]}]
+#set_property -dict { PACKAGE_PIN W6   IOSTANDARD LVCMOS33 } [get_ports {seg[1]}]
+#set_property -dict { PACKAGE_PIN U8   IOSTANDARD LVCMOS33 } [get_ports {seg[2]}]
+#set_property -dict { PACKAGE_PIN V8   IOSTANDARD LVCMOS33 } [get_ports {seg[3]}]
+#set_property -dict { PACKAGE_PIN U5   IOSTANDARD LVCMOS33 } [get_ports {seg[4]}]
+#set_property -dict { PACKAGE_PIN V5   IOSTANDARD LVCMOS33 } [get_ports {seg[5]}]
+#set_property -dict { PACKAGE_PIN U7   IOSTANDARD LVCMOS33 } [get_ports {seg[6]}]
+
+#set_property -dict { PACKAGE_PIN V7   IOSTANDARD LVCMOS33 } [get_ports dp]
+
+#set_property -dict { PACKAGE_PIN U2   IOSTANDARD LVCMOS33 } [get_ports {an[0]}]
+#set_property -dict { PACKAGE_PIN U4   IOSTANDARD LVCMOS33 } [get_ports {an[1]}]
+#set_property -dict { PACKAGE_PIN V4   IOSTANDARD LVCMOS33 } [get_ports {an[2]}]
+#set_property -dict { PACKAGE_PIN W4   IOSTANDARD LVCMOS33 } [get_ports {an[3]}]
+
+
+##Buttons
+set_property -dict { PACKAGE_PIN U18   IOSTANDARD LVCMOS33 } [get_ports RST]
+#set_property -dict { PACKAGE_PIN T18   IOSTANDARD LVCMOS33 } [get_ports btnU]
+#set_property -dict { PACKAGE_PIN W19   IOSTANDARD LVCMOS33 } [get_ports btnL]
+#set_property -dict { PACKAGE_PIN T17   IOSTANDARD LVCMOS33 } [get_ports btnR]
+#set_property -dict { PACKAGE_PIN U17   IOSTANDARD LVCMOS33 } [get_ports btnD]
+
+
+##Pmod Header JA
+#set_property -dict { PACKAGE_PIN J1   IOSTANDARD LVCMOS33 } [get_ports {JA[0]}];#Sch name = JA1
+#set_property -dict { PACKAGE_PIN L2   IOSTANDARD LVCMOS33 } [get_ports {JA[1]}];#Sch name = JA2
+#set_property -dict { PACKAGE_PIN J2   IOSTANDARD LVCMOS33 } [get_ports {JA[2]}];#Sch name = JA3
+#set_property -dict { PACKAGE_PIN G2   IOSTANDARD LVCMOS33 } [get_ports {JA[3]}];#Sch name = JA4
+#set_property -dict { PACKAGE_PIN H1   IOSTANDARD LVCMOS33 } [get_ports {JA[4]}];#Sch name = JA7
+#set_property -dict { PACKAGE_PIN K2   IOSTANDARD LVCMOS33 } [get_ports {JA[5]}];#Sch name = JA8
+#set_property -dict { PACKAGE_PIN H2   IOSTANDARD LVCMOS33 } [get_ports {JA[6]}];#Sch name = JA9
+#set_property -dict { PACKAGE_PIN G3   IOSTANDARD LVCMOS33 } [get_ports {JA[7]}];#Sch name = JA10
+
+##Pmod Header JB
+#set_property -dict { PACKAGE_PIN A14   IOSTANDARD LVCMOS33 } [get_ports {JB[0]}];#Sch name = JB1
+#set_property -dict { PACKAGE_PIN A16   IOSTANDARD LVCMOS33 } [get_ports {JB[1]}];#Sch name = JB2
+#set_property -dict { PACKAGE_PIN B15   IOSTANDARD LVCMOS33 } [get_ports {JB[2]}];#Sch name = JB3
+#set_property -dict { PACKAGE_PIN B16   IOSTANDARD LVCMOS33 } [get_ports {JB[3]}];#Sch name = JB4
+#set_property -dict { PACKAGE_PIN A15   IOSTANDARD LVCMOS33 } [get_ports {JB[4]}];#Sch name = JB7
+#set_property -dict { PACKAGE_PIN A17   IOSTANDARD LVCMOS33 } [get_ports {JB[5]}];#Sch name = JB8
+#set_property -dict { PACKAGE_PIN C15   IOSTANDARD LVCMOS33 } [get_ports {JB[6]}];#Sch name = JB9
+#set_property -dict { PACKAGE_PIN C16   IOSTANDARD LVCMOS33 } [get_ports {JB[7]}];#Sch name = JB10
+
+##Pmod Header JC
+#set_property -dict { PACKAGE_PIN K17   IOSTANDARD LVCMOS33 } [get_ports {JC[0]}];#Sch name = JC1
+#set_property -dict { PACKAGE_PIN M18   IOSTANDARD LVCMOS33 } [get_ports {JC[1]}];#Sch name = JC2
+#set_property -dict { PACKAGE_PIN N17   IOSTANDARD LVCMOS33 } [get_ports {JC[2]}];#Sch name = JC3
+#set_property -dict { PACKAGE_PIN P18   IOSTANDARD LVCMOS33 } [get_ports {JC[3]}];#Sch name = JC4
+#set_property -dict { PACKAGE_PIN L17   IOSTANDARD LVCMOS33 } [get_ports {JC[4]}];#Sch name = JC7
+#set_property -dict { PACKAGE_PIN M19   IOSTANDARD LVCMOS33 } [get_ports {JC[5]}];#Sch name = JC8
+#set_property -dict { PACKAGE_PIN P17   IOSTANDARD LVCMOS33 } [get_ports {JC[6]}];#Sch name = JC9
+#set_property -dict { PACKAGE_PIN R18   IOSTANDARD LVCMOS33 } [get_ports {JC[7]}];#Sch name = JC10
+
+##Pmod Header JXADC
+#set_property -dict { PACKAGE_PIN J3   IOSTANDARD LVCMOS33 } [get_ports {JXADC[0]}];#Sch name = XA1_P
+#set_property -dict { PACKAGE_PIN L3   IOSTANDARD LVCMOS33 } [get_ports {JXADC[1]}];#Sch name = XA2_P
+#set_property -dict { PACKAGE_PIN M2   IOSTANDARD LVCMOS33 } [get_ports {JXADC[2]}];#Sch name = XA3_P
+#set_property -dict { PACKAGE_PIN N2   IOSTANDARD LVCMOS33 } [get_ports {JXADC[3]}];#Sch name = XA4_P
+#set_property -dict { PACKAGE_PIN K3   IOSTANDARD LVCMOS33 } [get_ports {JXADC[4]}];#Sch name = XA1_N
+#set_property -dict { PACKAGE_PIN M3   IOSTANDARD LVCMOS33 } [get_ports {JXADC[5]}];#Sch name = XA2_N
+#set_property -dict { PACKAGE_PIN M1   IOSTANDARD LVCMOS33 } [get_ports {JXADC[6]}];#Sch name = XA3_N
+#set_property -dict { PACKAGE_PIN N1   IOSTANDARD LVCMOS33 } [get_ports {JXADC[7]}];#Sch name = XA4_N
+
+
+##VGA Connector
+#set_property -dict { PACKAGE_PIN G19   IOSTANDARD LVCMOS33 } [get_ports {vgaRed[0]}]
+#set_property -dict { PACKAGE_PIN H19   IOSTANDARD LVCMOS33 } [get_ports {vgaRed[1]}]
+#set_property -dict { PACKAGE_PIN J19   IOSTANDARD LVCMOS33 } [get_ports {vgaRed[2]}]
+#set_property -dict { PACKAGE_PIN N19   IOSTANDARD LVCMOS33 } [get_ports {vgaRed[3]}]
+#set_property -dict { PACKAGE_PIN N18   IOSTANDARD LVCMOS33 } [get_ports {vgaBlue[0]}]
+#set_property -dict { PACKAGE_PIN L18   IOSTANDARD LVCMOS33 } [get_ports {vgaBlue[1]}]
+#set_property -dict { PACKAGE_PIN K18   IOSTANDARD LVCMOS33 } [get_ports {vgaBlue[2]}]
+#set_property -dict { PACKAGE_PIN J18   IOSTANDARD LVCMOS33 } [get_ports {vgaBlue[3]}]
+#set_property -dict { PACKAGE_PIN J17   IOSTANDARD LVCMOS33 } [get_ports {vgaGreen[0]}]
+#set_property -dict { PACKAGE_PIN H17   IOSTANDARD LVCMOS33 } [get_ports {vgaGreen[1]}]
+#set_property -dict { PACKAGE_PIN G17   IOSTANDARD LVCMOS33 } [get_ports {vgaGreen[2]}]
+#set_property -dict { PACKAGE_PIN D17   IOSTANDARD LVCMOS33 } [get_ports {vgaGreen[3]}]
+#set_property -dict { PACKAGE_PIN P19   IOSTANDARD LVCMOS33 } [get_ports Hsync]
+#set_property -dict { PACKAGE_PIN R19   IOSTANDARD LVCMOS33 } [get_ports Vsync]
+
+
+##USB-RS232 Interface
+#set_property -dict { PACKAGE_PIN B18   IOSTANDARD LVCMOS33 } [get_ports RsRx]
+#set_property -dict { PACKAGE_PIN A18   IOSTANDARD LVCMOS33 } [get_ports RsTx]
+
+
+##USB HID (PS/2)
+#set_property -dict { PACKAGE_PIN C17   IOSTANDARD LVCMOS33   PULLUP true } [get_ports PS2Clk]
+#set_property -dict { PACKAGE_PIN B17   IOSTANDARD LVCMOS33   PULLUP true } [get_ports PS2Data]
+
+
+##Quad SPI Flash
+##Note that CCLK_0 cannot be placed in 7 series devices. You can access it using the
+##STARTUPE2 primitive.
+#set_property -dict { PACKAGE_PIN D18   IOSTANDARD LVCMOS33 } [get_ports {QspiDB[0]}]
+#set_property -dict { PACKAGE_PIN D19   IOSTANDARD LVCMOS33 } [get_ports {QspiDB[1]}]
+#set_property -dict { PACKAGE_PIN G18   IOSTANDARD LVCMOS33 } [get_ports {QspiDB[2]}]
+#set_property -dict { PACKAGE_PIN F18   IOSTANDARD LVCMOS33 } [get_ports {QspiDB[3]}]
+#set_property -dict { PACKAGE_PIN K19   IOSTANDARD LVCMOS33 } [get_ports QspiCSn]
+
+
+## Configuration options, can be used for all designs
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+set_property CFGBVS VCCO [current_design]
+
+## SPI configuration mode options for QSPI boot, can be used for all designs
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+set_property BITSTREAM.CONFIG.CONFIGRATE 33 [current_design]
+set_property CONFIG_MODE SPIx4 [current_design]
--- a/project_3_nzio/project_3_nzio.srcs/sources_1/new/COUNTER.vhd
+++ b/project_3_nzio/project_3_nzio.srcs/sources_1/new/COUNTER.vhd
@@ -0,0 +1,61 @@
+----------------------------------------------------------------------------------
+-- Company: 
+-- Engineer: 
+-- 
+-- Create Date: 02.03.2026 13:52:15
+-- Design Name: 
+-- Module Name: divider - Behavioral
+-- Project Name: 
+-- Target Devices: 
+-- Tool Versions: 
+-- Description: 
+-- 
+-- Dependencies: 
+-- 
+-- Revision:
+-- Revision 0.01 - File Created
+-- Additional Comments:
+-- 
+----------------------------------------------------------------------------------
+
+
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+--use IEEE.NUMERIC_STD.ALL;
+
+
+entity counter is
+    Port ( CLK : in STD_LOGIC;
+           RST : in STD_LOGIC;
+           CE : in std_logic;
+           COUNT_OUT : out STD_LOGIC_VECTOR (3 downto 0));
+end counter;
+
+architecture Behavioral of counter is
+
+signal div_cnt : STD_LOGIC_VECTOR (3 downto 0);
+
+begin
+
+DIV: process (CLK, CE, RST, div_cnt)
+begin
+    if (RST = '1') then
+        div_cnt <= (others => '0');
+    elsif ((CLK = '1') and (CLK'event)) then
+        if (CE = '1') then
+            if (div_cnt < "1111") then
+                div_cnt <= div_cnt +1;
+            else
+                div_cnt <= (others => '0');
+            end if;
+        end if;
+    end if;
+end process;
+
+COUNT_OUT <= div_cnt;
+   
+end Behavioral;
--- a/project_3_nzio/project_3_nzio.srcs/sources_1/new/divider.vhd
+++ b/project_3_nzio/project_3_nzio.srcs/sources_1/new/divider.vhd
@@ -0,0 +1,72 @@
+----------------------------------------------------------------------------------
+-- Company: 
+-- Engineer: 
+-- 
+-- Create Date: 02.03.2026 13:52:15
+-- Design Name: 
+-- Module Name: divider - Behavioral
+-- Project Name: 
+-- Target Devices: 
+-- Tool Versions: 
+-- Description: 
+-- 
+-- Dependencies: 
+-- 
+-- Revision:
+-- Revision 0.01 - File Created
+-- Additional Comments:
+-- 
+----------------------------------------------------------------------------------
+
+
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+use IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+--use IEEE.NUMERIC_STD.ALL;
+
+-- Uncomment the following library declaration if instantiating
+-- any Xilinx leaf cells in this code.
+library UNISIM;
+use UNISIM.VComponents.all;
+
+entity divider is
+    Port ( CLK : in STD_LOGIC;
+           RST : in STD_LOGIC;
+           CLK_1_Hz : out STD_LOGIC);
+end divider;
+
+architecture Behavioral of divider is
+
+signal div_cnt : STD_LOGIC_VECTOR (26 downto 0);
+signal ce : STD_LOGIC;
+
+begin
+
+DIV: process (CLK, RST, div_cnt)
+begin
+    if (RST = '1') then
+        div_cnt <= (others => '0');
+    elsif ((CLK = '1') and (CLK'event)) then
+            if (div_cnt < "0101111101011110000011111111") then
+                div_cnt <= div_cnt +1;
+            else
+                div_cnt <= (others => '0');
+            end if;
+    end if;
+end process;
+
+
+BUFGCE_inst_0 : BUFGCE
+   port map (
+      O => CLK_1_Hz,   -- 1-bit output: Clock output
+      CE => ce, -- 1-bit input: Clock enable input for I0
+      I => CLK    -- 1-bit input: Primary clock
+   );
+
+ce <= '1' when div_cnt = "0101111101011110000011111111" 
+            else '0';
+   
+end Behavioral;
--- a/project_3_nzio/project_3_nzio.srcs/sources_1/new/top_modul.vhd
+++ b/project_3_nzio/project_3_nzio.srcs/sources_1/new/top_modul.vhd
@@ -0,0 +1,77 @@
+----------------------------------------------------------------------------------
+-- Company: 
+-- Engineer: 
+-- 
+-- Create Date: 02.03.2026 14:36:06
+-- Design Name: 
+-- Module Name: top_modul - Behavioral
+-- Project Name: 
+-- Target Devices: 
+-- Tool Versions: 
+-- Description: 
+-- 
+-- Dependencies: 
+-- 
+-- Revision:
+-- Revision 0.01 - File Created
+-- Additional Comments:
+-- 
+----------------------------------------------------------------------------------
+
+
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+--use IEEE.NUMERIC_STD.ALL;
+
+-- Uncomment the following library declaration if instantiating
+-- any Xilinx leaf cells in this code.
+--library UNISIM;
+--use UNISIM.VComponents.all;
+
+entity top_modul is
+    Port ( CLK : in STD_LOGIC;
+           RST : in STD_LOGIC;
+           CE : in STD_LOGIC;
+           LEDS : out STD_LOGIC_VECTOR (3 downto 0));
+end top_modul;
+
+
+
+architecture Behavioral of top_modul is
+
+
+component divider is
+    Port ( CLK : in STD_LOGIC;
+           RST : in STD_LOGIC;
+           CLK_1_Hz : out STD_LOGIC);
+end component;
+
+component counter is
+    Port ( CLK : in STD_LOGIC;
+           RST : in STD_LOGIC;
+           CE : in std_logic;
+           COUNT_OUT : out STD_LOGIC_VECTOR (3 downto 0));
+end component;
+
+signal clk_1_hz : std_logic;
+begin
+
+divider_inst_0 : divider
+   port map (
+      CLK => CLK,   -- 1-bit output: Clock output
+      RST => RST, -- 1-bit input: Clock enable input for I0
+      CLK_1_Hz => clk_1_hz    -- 1-bit input: Primary clock
+   );
+
+counter_inst_0 : counter
+    port map ( CLK => clk_1_hz,
+                RST => RST,
+                CE => CE,
+                COUNT_OUT => LEDS
+                );
+                
+
+end Behavioral;
--- a/project_3_nzio/project_3_nzio.xpr
+++ b/project_3_nzio/project_3_nzio.xpr
@@ -0,0 +1,248 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Product Version: Vivado v2022.2 (64-bit)              -->
+<!--                                                         -->
+<!-- Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.   -->
+
+<Project Version="7" Minor="61" Path="C:/Users/student/Documents/priecinok/project_3_nzio/project_3_nzio.xpr">
+  <DefaultLaunch Dir="$PRUNDIR"/>
+  <Configuration>
+    <Option Name="Id" Val="96c6b73273ba40959da754b94157fa0d"/>
+    <Option Name="Part" Val="xc7a35tcpg236-1"/>
+    <Option Name="CompiledLibDir" Val="$PCACHEDIR/compile_simlib"/>
+    <Option Name="CompiledLibDirXSim" Val=""/>
+    <Option Name="CompiledLibDirModelSim" Val="$PCACHEDIR/compile_simlib/modelsim"/>
+    <Option Name="CompiledLibDirQuesta" Val="$PCACHEDIR/compile_simlib/questa"/>
+    <Option Name="CompiledLibDirXcelium" Val="$PCACHEDIR/compile_simlib/xcelium"/>
+    <Option Name="CompiledLibDirVCS" Val="$PCACHEDIR/compile_simlib/vcs"/>
+    <Option Name="CompiledLibDirRiviera" Val="$PCACHEDIR/compile_simlib/riviera"/>
+    <Option Name="CompiledLibDirActivehdl" Val="$PCACHEDIR/compile_simlib/activehdl"/>
+    <Option Name="SimulatorInstallDirModelSim" Val=""/>
+    <Option Name="SimulatorInstallDirQuesta" Val=""/>
+    <Option Name="SimulatorInstallDirXcelium" Val=""/>
+    <Option Name="SimulatorInstallDirVCS" Val=""/>
+    <Option Name="SimulatorInstallDirRiviera" Val=""/>
+    <Option Name="SimulatorInstallDirActiveHdl" Val=""/>
+    <Option Name="SimulatorGccInstallDirModelSim" Val=""/>
+    <Option Name="SimulatorGccInstallDirQuesta" Val=""/>
+    <Option Name="SimulatorGccInstallDirXcelium" Val=""/>
+    <Option Name="SimulatorGccInstallDirVCS" Val=""/>
+    <Option Name="SimulatorGccInstallDirRiviera" Val=""/>
+    <Option Name="SimulatorGccInstallDirActiveHdl" Val=""/>
+    <Option Name="SimulatorVersionXsim" Val="2022.2"/>
+    <Option Name="SimulatorVersionModelSim" Val="2022.2"/>
+    <Option Name="SimulatorVersionQuesta" Val="2022.2"/>
+    <Option Name="SimulatorVersionXcelium" Val="21.09.009"/>
+    <Option Name="SimulatorVersionVCS" Val="S-2021.09"/>
+    <Option Name="SimulatorVersionRiviera" Val="2022.04"/>
+    <Option Name="SimulatorVersionActiveHdl" Val="13.0"/>
+    <Option Name="SimulatorGccVersionXsim" Val="6.2.0"/>
+    <Option Name="SimulatorGccVersionModelSim" Val="7.4.0"/>
+    <Option Name="SimulatorGccVersionQuesta" Val="7.4.0"/>
+    <Option Name="SimulatorGccVersionXcelium" Val="9.3.0"/>
+    <Option Name="SimulatorGccVersionVCS" Val="9.2.0"/>
+    <Option Name="SimulatorGccVersionRiviera" Val="9.3.0"/>
+    <Option Name="SimulatorGccVersionActiveHdl" Val="9.3.0"/>
+    <Option Name="TargetLanguage" Val="VHDL"/>
+    <Option Name="SimulatorLanguage" Val="VHDL"/>
+    <Option Name="BoardPart" Val="digilentinc.com:basys3:part0:1.2"/>
+    <Option Name="BoardPartRepoPaths" Val="$PPRDIR/../../../AppData/Roaming/Xilinx/Vivado/2022.2/xhub/board_store/xilinx_board_store"/>
+    <Option Name="ActiveSimSet" Val="sim_1"/>
+    <Option Name="DefaultLib" Val="xil_defaultlib"/>
+    <Option Name="ProjectType" Val="Default"/>
+    <Option Name="IPOutputRepo" Val="$PCACHEDIR/ip"/>
+    <Option Name="IPDefaultOutputPath" Val="$PGENDIR/sources_1"/>
+    <Option Name="IPCachePermission" Val="read"/>
+    <Option Name="IPCachePermission" Val="write"/>
+    <Option Name="EnableCoreContainer" Val="FALSE"/>
+    <Option Name="EnableResourceEstimation" Val="FALSE"/>
+    <Option Name="SimCompileState" Val="TRUE"/>
+    <Option Name="CreateRefXciForCoreContainers" Val="FALSE"/>
+    <Option Name="IPUserFilesDir" Val="$PIPUSERFILESDIR"/>
+    <Option Name="IPStaticSourceDir" Val="$PIPUSERFILESDIR/ipstatic"/>
+    <Option Name="EnableBDX" Val="FALSE"/>
+    <Option Name="DSABoardId" Val="basys3"/>
+    <Option Name="WTXSimLaunchSim" Val="0"/>
+    <Option Name="WTModelSimLaunchSim" Val="0"/>
+    <Option Name="WTQuestaLaunchSim" Val="0"/>
+    <Option Name="WTIesLaunchSim" Val="0"/>
+    <Option Name="WTVcsLaunchSim" Val="0"/>
+    <Option Name="WTRivieraLaunchSim" Val="0"/>
+    <Option Name="WTActivehdlLaunchSim" Val="0"/>
+    <Option Name="WTXSimExportSim" Val="0"/>
+    <Option Name="WTModelSimExportSim" Val="0"/>
+    <Option Name="WTQuestaExportSim" Val="0"/>
+    <Option Name="WTIesExportSim" Val="0"/>
+    <Option Name="WTVcsExportSim" Val="0"/>
+    <Option Name="WTRivieraExportSim" Val="0"/>
+    <Option Name="WTActivehdlExportSim" Val="0"/>
+    <Option Name="GenerateIPUpgradeLog" Val="TRUE"/>
+    <Option Name="XSimRadix" Val="hex"/>
+    <Option Name="XSimTimeUnit" Val="ns"/>
+    <Option Name="XSimArrayDisplayLimit" Val="1024"/>
+    <Option Name="XSimTraceLimit" Val="65536"/>
+    <Option Name="SimTypes" Val="rtl"/>
+    <Option Name="SimTypes" Val="bfm"/>
+    <Option Name="SimTypes" Val="tlm"/>
+    <Option Name="SimTypes" Val="tlm_dpi"/>
+    <Option Name="MEMEnableMemoryMapGeneration" Val="TRUE"/>
+    <Option Name="DcpsUptoDate" Val="TRUE"/>
+    <Option Name="ClassicSocBoot" Val="FALSE"/>
+    <Option Name="LocalIPRepoLeafDirName" Val="ip_repo"/>
+  </Configuration>
+  <FileSets Version="1" Minor="31">
+    <FileSet Name="sources_1" Type="DesignSrcs" RelSrcDir="$PSRCDIR/sources_1" RelGenDir="$PGENDIR/sources_1">
+      <Filter Type="Srcs"/>
+      <File Path="$PSRCDIR/sources_1/new/COUNTER.vhd">
+        <FileInfo>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="simulation"/>
+        </FileInfo>
+      </File>
+      <File Path="$PSRCDIR/sources_1/new/divider.vhd">
+        <FileInfo>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="simulation"/>
+        </FileInfo>
+      </File>
+      <File Path="$PSRCDIR/sources_1/new/top_modul.vhd">
+        <FileInfo>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="simulation"/>
+        </FileInfo>
+      </File>
+      <Config>
+        <Option Name="DesignMode" Val="RTL"/>
+        <Option Name="TopModule" Val="top_modul"/>
+        <Option Name="TopAutoSet" Val="TRUE"/>
+      </Config>
+    </FileSet>
+    <FileSet Name="constrs_1" Type="Constrs" RelSrcDir="$PSRCDIR/constrs_1" RelGenDir="$PGENDIR/constrs_1">
+      <Filter Type="Constrs"/>
+      <File Path="$PSRCDIR/constrs_1/imports/Downloads/Basys-3-Master.xdc">
+        <FileInfo>
+          <Attr Name="ImportPath" Val="$PPRDIR/../../../Downloads/Basys-3-Master.xdc"/>
+          <Attr Name="ImportTime" Val="1771253458"/>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="implementation"/>
+        </FileInfo>
+      </File>
+      <Config>
+        <Option Name="ConstrsType" Val="XDC"/>
+      </Config>
+    </FileSet>
+    <FileSet Name="sim_1" Type="SimulationSrcs" RelSrcDir="$PSRCDIR/sim_1" RelGenDir="$PGENDIR/sim_1">
+      <Config>
+        <Option Name="DesignMode" Val="RTL"/>
+        <Option Name="TopModule" Val="top_modul"/>
+        <Option Name="TopLib" Val="xil_defaultlib"/>
+        <Option Name="TopAutoSet" Val="TRUE"/>
+        <Option Name="TransportPathDelay" Val="0"/>
+        <Option Name="TransportIntDelay" Val="0"/>
+        <Option Name="SelectedSimModel" Val="rtl"/>
+        <Option Name="PamDesignTestbench" Val=""/>
+        <Option Name="PamDutBypassFile" Val="xil_dut_bypass"/>
+        <Option Name="PamSignalDriverFile" Val="xil_bypass_driver"/>
+        <Option Name="PamPseudoTop" Val="pseudo_tb"/>
+        <Option Name="SrcSet" Val="sources_1"/>
+      </Config>
+    </FileSet>
+    <FileSet Name="utils_1" Type="Utils" RelSrcDir="$PSRCDIR/utils_1" RelGenDir="$PGENDIR/utils_1">
+      <Filter Type="Utils"/>
+      <File Path="$PSRCDIR/utils_1/imports/synth_1/top_modul.dcp">
+        <FileInfo>
+          <Attr Name="UsedIn" Val="synthesis"/>
+          <Attr Name="UsedIn" Val="implementation"/>
+          <Attr Name="UsedInSteps" Val="synth_1"/>
+          <Attr Name="AutoDcp" Val="1"/>
+        </FileInfo>
+      </File>
+      <Config>
+        <Option Name="TopAutoSet" Val="TRUE"/>
+      </Config>
+    </FileSet>
+  </FileSets>
+  <Simulators>
+    <Simulator Name="XSim">
+      <Option Name="Description" Val="Vivado Simulator"/>
+      <Option Name="CompiledLib" Val="0"/>
+    </Simulator>
+    <Simulator Name="ModelSim">
+      <Option Name="Description" Val="ModelSim Simulator"/>
+    </Simulator>
+    <Simulator Name="Questa">
+      <Option Name="Description" Val="Questa Advanced Simulator"/>
+    </Simulator>
+    <Simulator Name="Riviera">
+      <Option Name="Description" Val="Riviera-PRO Simulator"/>
+    </Simulator>
+    <Simulator Name="ActiveHDL">
+      <Option Name="Description" Val="Active-HDL Simulator"/>
+    </Simulator>
+  </Simulators>
+  <Runs Version="1" Minor="19">
+    <Run Id="synth_1" Type="Ft3:Synth" SrcSet="sources_1" Part="xc7a35tcpg236-1" ConstrsSet="constrs_1" Description="Vivado Synthesis Defaults" AutoIncrementalCheckpoint="true" IncrementalCheckpoint="$PSRCDIR/utils_1/imports/synth_1/top_modul.dcp" WriteIncrSynthDcp="false" State="current" Dir="$PRUNDIR/synth_1" IncludeInArchive="true" IsChild="false" AutoIncrementalDir="$PSRCDIR/utils_1/imports/synth_1" AutoRQSDir="$PSRCDIR/utils_1/imports/synth_1">
+      <Strategy Version="1" Minor="2">
+        <StratHandle Name="Vivado Synthesis Defaults" Flow="Vivado Synthesis 2022">
+          <Desc>Vivado Synthesis Defaults</Desc>
+        </StratHandle>
+        <Step Id="synth_design"/>
+      </Strategy>
+      <GeneratedRun Dir="$PRUNDIR" File="gen_run.xml"/>
+      <ReportStrategy Name="Vivado Synthesis Default Reports" Flow="Vivado Synthesis 2022"/>
+      <Report Name="ROUTE_DESIGN.REPORT_METHODOLOGY" Enabled="1"/>
+      <RQSFiles/>
+    </Run>
+    <Run Id="impl_1" Type="Ft2:EntireDesign" Part="xc7a35tcpg236-1" ConstrsSet="constrs_1" Description="Default settings for Implementation." AutoIncrementalCheckpoint="false" WriteIncrSynthDcp="false" State="current" Dir="$PRUNDIR/impl_1" SynthRun="synth_1" IncludeInArchive="true" IsChild="false" GenFullBitstream="true" AutoIncrementalDir="$PSRCDIR/utils_1/imports/impl_1" AutoRQSDir="$PSRCDIR/utils_1/imports/impl_1">
+      <Strategy Version="1" Minor="2">
+        <StratHandle Name="Vivado Implementation Defaults" Flow="Vivado Implementation 2022">
+          <Desc>Default settings for Implementation.</Desc>
+        </StratHandle>
+        <Step Id="init_design"/>
+        <Step Id="opt_design"/>
+        <Step Id="power_opt_design"/>
+        <Step Id="place_design"/>
+        <Step Id="post_place_power_opt_design"/>
+        <Step Id="phys_opt_design"/>
+        <Step Id="route_design"/>
+        <Step Id="post_route_phys_opt_design"/>
+        <Step Id="write_bitstream"/>
+      </Strategy>
+      <GeneratedRun Dir="$PRUNDIR" File="gen_run.xml"/>
+      <ReportStrategy Name="Vivado Implementation Default Reports" Flow="Vivado Implementation 2022"/>
+      <Report Name="ROUTE_DESIGN.REPORT_METHODOLOGY" Enabled="1"/>
+      <RQSFiles/>
+    </Run>
+  </Runs>
+  <Board>
+    <Jumpers/>
+  </Board>
+  <DashboardSummary Version="1" Minor="0">
+    <Dashboards>
+      <Dashboard Name="default_dashboard">
+        <Gadgets>
+          <Gadget Name="drc_1" Type="drc" Version="1" Row="2" Column="0">
+            <GadgetParam Name="REPORTS" Type="string_list" Value="impl_1#impl_1_route_report_drc_0 "/>
+          </Gadget>
+          <Gadget Name="methodology_1" Type="methodology" Version="1" Row="2" Column="1">
+            <GadgetParam Name="REPORTS" Type="string_list" Value="impl_1#impl_1_route_report_methodology_0 "/>
+          </Gadget>
+          <Gadget Name="power_1" Type="power" Version="1" Row="1" Column="0">
+            <GadgetParam Name="REPORTS" Type="string_list" Value="impl_1#impl_1_route_report_power_0 "/>
+          </Gadget>
+          <Gadget Name="timing_1" Type="timing" Version="1" Row="0" Column="1">
+            <GadgetParam Name="REPORTS" Type="string_list" Value="impl_1#impl_1_route_report_timing_summary_0 "/>
+          </Gadget>
+          <Gadget Name="utilization_1" Type="utilization" Version="1" Row="0" Column="0">
+            <GadgetParam Name="REPORTS" Type="string_list" Value="synth_1#synth_1_synth_report_utilization_0 "/>
+            <GadgetParam Name="RUN.STEP" Type="string" Value="synth_design"/>
+            <GadgetParam Name="RUN.TYPE" Type="string" Value="synthesis"/>
+          </Gadget>
+          <Gadget Name="utilization_2" Type="utilization" Version="1" Row="1" Column="1">
+            <GadgetParam Name="REPORTS" Type="string_list" Value="impl_1#impl_1_place_report_utilization_0 "/>
+          </Gadget>
+        </Gadgets>
+      </Dashboard>
+      <CurrentDashboard>default_dashboard</CurrentDashboard>
+    </Dashboards>
+  </DashboardSummary>
+</Project>