moves

semestralka_2_uart/Cargo.toml

@@ -16,7 +16,7 @@ embassy-sync    = { git = "https://github.com/embassy-rs/embassy.git", branch =
 embassy-time    = { git = "https://github.com/embassy-rs/embassy.git", branch = "main", features = ["tick-hz-32_768"] }
 embassy-hal-internal = { git = "https://github.com/embassy-rs/embassy.git", branch = "main" }
 embassy-usb = { git = "https://github.com/embassy-rs/embassy.git", branch = "main" }
-embassy-stm32 = { git = "https://github.com/embassy-rs/embassy.git", branch = "main", features = ["unstable-pac", "stm32u575zi", "time-driver-tim2", "memory-x", "defmt"] }
+embassy-stm32 = { git = "https://github.com/embassy-rs/embassy.git", branch = "main", features = ["unstable-pac", "stm32u575zi", "time-driver-tim2", "memory-x", "defmt", "exti"] }
 
 embedded-hal = "1.0.0"
 embedded-graphics = "0.8.1"

semestralka_2_uart/build.rs

@@ -37,6 +37,8 @@ fn main() {
         build.file(hal_driver.join("Src").join(src));
     }
 
+    build.file("src/c_ll/stop0_ll.c");
+
     build
         .include(hal_driver.join("Inc"))
         .include(device.join("Include"))

semestralka_2_uart/src/bin/main.rs

@@ -4,16 +4,17 @@
 
 use defmt::*;
 use embassy_stm32::pac;
-use embassy_executor::Spawner;
+use embassy_executor::{Spawner, task};
 use embassy_stm32::Config;
 use embassy_stm32::gpio::{Output, Level, Speed};
 use embassy_time::{Duration, Timer};
 
 use dma_gpio::config::BAUD;
-use dma_gpio::wakeup::iwdg::{clear_wakeup_flags, init_watchdog_reset};
-use dma_gpio::sleep::shutdown;
-use dma_gpio::sleep::standby;
-use dma_gpio::hw_uart_pc::init::{init_hw_uart_to_pc, LowPowerCmd, CMD_CH};
+use dma_gpio::wakeup::iwdg::clear_wakeup_flags;
+use dma_gpio::wakeup::gpio::gpio_wakeup;
+use dma_gpio::logic::handler::execute_low_power;
+use dma_gpio::hw_uart_pc::init::init_hw_uart_to_pc;
+use dma_gpio::logic::uart_cmd::CMD_CH;
 use {defmt_rtt as _, panic_probe as _};
 
 #[embassy_executor::main]
@@ -29,6 +30,9 @@ async fn main(spawner: Spawner) {
     led.set_high();
     info!("LED ON (MCU awake)");
 
+    // LED BLINK
+    // spawner.spawn(led_blink(led).unwrap());
+    
     // INIT HW UART
     init_hw_uart_to_pc(p.USART1, p.PA10, p.PA9, &spawner);
 
@@ -45,7 +49,8 @@ async fn main(spawner: Spawner) {
          [1] Standby + 8 KB SRAM2 retention\n\
          [2] Standby + full SRAM2 retention\n\
          [3] Standby — minimal power, SRAM2 lost\n\
-           [4] Shutdown — lowest power, full reset on wake",
+         [4] Shutdown — lowest power, full reset on wake\n\
+         [5] STOP mode (then choose: 0-3 for mode, 1-3 for entry method)",
          BAUD, WATCHDOG_TIMEOUT_US / 1_000_000
     );
 
@@ -60,28 +65,19 @@ async fn main(spawner: Spawner) {
     Timer::after(Duration::from_millis(10)).await;
 
     info!("ready for uart");
+    let mut iwdg = Some(p.IWDG);
+    
+    spawner.spawn(gpio_wakeup(p.PA0, p.EXTI0).unwrap()); // exti wake up
     loop {
         let cmd = CMD_CH.receive().await;
-        match cmd {
-            LowPowerCmd::Standby8k => {
-                init_watchdog_reset(p.IWDG).await; // watchdog reset at configurated time
-                Timer::after(Duration::from_millis(10)).await; // let UART flush
-                standby::enter_standby_with_sram2_8kb();
-            }
-            LowPowerCmd::StandbyFull => {
-                init_watchdog_reset(p.IWDG).await;
-                Timer::after(Duration::from_millis(10)).await;
-                standby::enter_standby_with_sram2_full();
-            }
-            LowPowerCmd::Standby => {
-                init_watchdog_reset(p.IWDG).await;
-                Timer::after(Duration::from_millis(10)).await;
-                standby::enter_standby();
-            }
-            LowPowerCmd::Shutdown => {
-                Timer::after(Duration::from_millis(10)).await;
-                shutdown::enter_shutdown();
+        execute_low_power(cmd, &mut iwdg).await;
     }
 }
+
+#[task]
+async fn led_blink(mut led: Output<'static>) {
+    loop {
+        led.toggle();
+        Timer::after(Duration::from_millis(300)).await;
     }
 }

semestralka_2_uart/src/c_ll/stop0_ll.c

@@ -0,0 +1,8 @@
+#include "stm32u5xx_ll_pwr.h"
+
+void rust_LL_PWR_SetPowerMode(unsigned int mode)
+{
+    // Configure STOP0
+    LL_PWR_SetPowerMode(mode);
+
+}

semestralka_2_uart/src/hw_uart_pc/driver.rs

@@ -33,7 +33,7 @@ pub async fn uart_task(
             }
             // Outgoing data waiting in TX pipe
             Either::Second(n) => {
-                unwrap!(uart.write(&tx_buf[..n]).await);
+                unwrap!(uart.write_all(&tx_buf[..n]).await);
             }
         }
         yield_now().await;

semestralka_2_uart/src/hw_uart_pc/init.rs

@@ -1,12 +1,8 @@
 // src/hw_uart_pc/init.rs
 
-use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
-use embassy_sync::channel::Channel;
-use embassy_futures::yield_now;
-
-// UART HW init
 use crate::config::{BAUD, PIPE_HW_TX, PIPE_HW_RX};
 use crate::hw_uart_pc::driver::uart_task;
+use crate::logic::uart_cmd::uart_cmd_task;
 use static_cell::StaticCell;
 use embassy_stm32::usart::BufferedInterruptHandler;
 use embassy_stm32::usart::{BufferedUart, Config as UsartConfig};
@@ -21,53 +17,6 @@ bind_interrupts!(struct Irqs {
     USART1 => BufferedInterruptHandler<peripherals::USART1>;
 });
 
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum LowPowerCmd {
-    Standby8k,     // 1
-    StandbyFull,   // 2
-    Standby,       // 3
-    Shutdown,      // 4
-}
-
-pub static CMD_CH: Channel<CriticalSectionRawMutex, LowPowerCmd, 1> = Channel::new();
-
-#[embassy_executor::task]
-pub async fn uart_cmd_task() {
-    // Prompt once
-    let _ = PIPE_HW_TX
-        .write(b"Modes: 1=SB8, 2=SBfull, 3=SB, 4=SD\r\n")
-        .await;
-
-    let mut b = [0u8; 1];
-    loop {
-        let n = PIPE_HW_RX.read(&mut b).await;
-        if n == 0 {
-            continue;
-        }
-        match b[0] {
-            b'1' => {
-                let _ = PIPE_HW_TX.write(b"ACK 1: standby 8KB\r\n").await;
-                CMD_CH.send(LowPowerCmd::Standby8k).await;
-            }
-            b'2' => {
-                let _ = PIPE_HW_TX.write(b"ACK 2: standby full\r\n").await;
-                CMD_CH.send(LowPowerCmd::StandbyFull).await;
-            }
-            b'3' => {
-                let _ = PIPE_HW_TX.write(b"ACK 3: standby\r\n").await;
-                CMD_CH.send(LowPowerCmd::Standby).await;
-            }
-            b'4' => {
-                let _ = PIPE_HW_TX.write(b"ACK 4: shutdown\r\n").await;
-                CMD_CH.send(LowPowerCmd::Shutdown).await;
-            }
-            b'\r' | b'\n' | b' ' => {}
-            _ => { let _ = PIPE_HW_TX.write(b"ERR: use 1|2|3|4\r\n").await; }
-        }
-        yield_now().await;
-    }
-}
-
 pub fn init_hw_uart_to_pc(
     usart1: Peri<'static, USART1>,
     pa10: Peri<'static, PA10>,

semestralka_2_uart/src/hw_uart_pc/mod.rs

@@ -1,4 +1,5 @@
 // src/hw_uart_pc/mod.rs
+
 pub mod driver;
 pub mod usart1;
 pub mod safety;

semestralka_2_uart/src/lib.rs

@@ -6,3 +6,4 @@ pub mod hw_uart_pc;
 pub mod config;
 pub mod sleep;
 pub mod wakeup;
+pub mod logic;

semestralka_2_uart/src/logic/handler.rs

@@ -0,0 +1,67 @@
+// src/logic/handler.rs
+
+use embassy_time::{Duration, Timer};
+use embassy_stm32::peripherals;
+use embassy_stm32::Peri;
+
+use crate::sleep::stop::{enter_stop0, enter_stop1, enter_stop2, enter_stop3};
+use crate::sleep::sleep::{enter_sleep_mode, SleepEntry};
+use crate::sleep::{standby, shutdown};
+use crate::wakeup::iwdg::init_watchdog_reset;
+use crate::logic::uart_cmd::{LowPowerCmd, StopMode, StopModeConfig};
+
+use defmt::info;
+
+pub async fn execute_low_power(
+    cmd: LowPowerCmd, 
+    iwdg: &mut Option<Peri<'static, peripherals::IWDG>>
+) {
+    Timer::after(Duration::from_millis(10)).await;
+
+    match cmd {
+        LowPowerCmd::Standby8k => {
+            info!("Entering Standby with 8KB SRAM2 retention");
+            if let Some(wdg) = iwdg.take() {
+                init_watchdog_reset(wdg).await;
+            }
+            standby::enter_standby_with_sram2_8kb();
+        }
+        LowPowerCmd::StandbyFull => {
+            info!("Entering Standby with full SRAM2 retention");
+            if let Some(wdg) = iwdg.take() {
+                init_watchdog_reset(wdg).await;
+            }
+            standby::enter_standby_with_sram2_full();
+        }
+        LowPowerCmd::Standby => {
+            info!("Entering minimal Standby");
+            if let Some(wdg) = iwdg.take() {
+                init_watchdog_reset(wdg).await;
+            }
+            standby::enter_standby();
+        }
+        LowPowerCmd::Shutdown => {
+            info!("Entering Shutdown mode");
+            shutdown::enter_shutdown();
+        }
+        LowPowerCmd::StopMode(StopModeConfig { mode, entry }) => {
+            info!("Entering {:?} with {:?}", mode, entry);
+            match mode {
+                StopMode::Stop0 => enter_stop0(),
+                StopMode::Stop1 => enter_stop1(entry),
+                StopMode::Stop2 => enter_stop2(entry),
+                StopMode::Stop3 => {
+                    if let Some(wdg) = iwdg.take() {
+                        init_watchdog_reset(wdg).await;
+                    }
+                    enter_stop3(entry);
+                }
+            }
+        }
+        LowPowerCmd::Sleep => {
+            info!("Entering Sleep mode (WFI)...");
+            enter_sleep_mode(SleepEntry::Wfi);
+            info!("Woke up from Sleep mode.");
+        }
+    }
+}

semestralka_2_uart/src/logic/mod.rs

@@ -0,0 +1,4 @@
+// src/logic/mod.rs
+
+pub mod handler;
+pub mod uart_cmd;

semestralka_2_uart/src/logic/uart_cmd.rs

@@ -0,0 +1,106 @@
+// src/logic/uart_cmd.rs
+
+use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
+use embassy_sync::channel::Channel;
+
+// UART HW init
+use crate::config::{PIPE_HW_TX, PIPE_HW_RX};
+use crate::sleep::StopEntry;
+
+pub static CMD_CH: Channel<CriticalSectionRawMutex, LowPowerCmd, 1> = Channel::new();
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq, defmt::Format)]
+pub enum LowPowerCmd {
+    Standby8k,     // 1
+    StandbyFull,   // 2
+    Standby,       // 3
+    Shutdown,      // 4
+    StopMode(StopModeConfig),
+    Sleep,
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq, defmt::Format)]
+pub struct StopModeConfig {
+    pub mode: StopMode,
+    pub entry: StopEntry,
+}
+
+#[derive(Debug, Clone, Copy, PartialEq, Eq, defmt::Format)]
+pub enum StopMode {
+    Stop0,
+    Stop1,
+    Stop2,
+    Stop3,
+}
+
+#[embassy_executor::task]
+pub async fn uart_cmd_task() {
+    async fn print_menu() {
+        while PIPE_HW_TX.len() > 0 {
+            embassy_time::Timer::after(embassy_time::Duration::from_millis(8)).await;
+        }
+        let _ = PIPE_HW_TX.write(
+            b"\x1B[2J\x1B[H\r\n\
+            Modes:\r\n\
+            [1] Standby + 8 KB SRAM2 retention\r\n\
+            [2] Standby + full SRAM2 retention\r\n\
+            [3] Standby minimal\r\n\
+            [4] Shutdown\r\n\
+            [5] Stop mode (0-3)\r\n\
+            [6] Sleep mode (WFI or WFE)\r\n\
+            "
+        ).await;
+        embassy_time::Timer::after(embassy_time::Duration::from_millis(8)).await;
+    }
+
+    print_menu().await;
+
+    let mut b = [0u8; 2];
+    loop {
+        b.fill(0);
+        let n = PIPE_HW_RX.read(&mut b).await;
+        if n == 0 { continue; }
+
+        match b[0] {
+            b'1' => CMD_CH.send(LowPowerCmd::Standby8k).await,
+            b'2' => CMD_CH.send(LowPowerCmd::StandbyFull).await,
+            b'3' => CMD_CH.send(LowPowerCmd::Standby).await,
+            b'4' => CMD_CH.send(LowPowerCmd::Shutdown).await,
+            b'5' => {
+                let _ = PIPE_HW_TX.write(b"Enter Stop mode number (0-3): ").await;
+                b.fill(0);
+                let n = PIPE_HW_RX.read(&mut b).await;
+                if n == 0 { print_menu().await; continue; }
+                let stop_mode = match b[0] {
+                    b'0' => StopMode::Stop0,
+                    b'1' => StopMode::Stop1,
+                    b'2' => StopMode::Stop2,
+                    b'3' => StopMode::Stop3,
+                    _ => { print_menu().await; continue; }
+                };
+
+                if matches!(stop_mode, StopMode::Stop0) {
+                    CMD_CH.send(LowPowerCmd::StopMode(StopModeConfig {
+                        mode: stop_mode,
+                        entry: StopEntry::Wfi, // to tu je, lebo nejdem prepisovat kod, kvoli
+                                               // pos**temu halu co si nevie urobit konzistentnost
+                    })).await;
+                    continue;
+                }
+                let _ = PIPE_HW_TX.write(b"Enter entry method (1=WFI,2=WFE,3=WFE no clear): ").await;
+                b.fill(0);
+                let n = PIPE_HW_RX.read(&mut b).await;
+                if n == 0 { print_menu().await; continue; }
+                let entry = match b[0] {
+                    b'1' => StopEntry::Wfi,
+                    b'2' => StopEntry::Wfe,
+                    b'3' => StopEntry::WfeNoEventClear,
+                    _ => { print_menu().await; continue; }
+                };
+                CMD_CH.send(LowPowerCmd::StopMode(StopModeConfig { mode: stop_mode, entry })).await;
+            },
+            b'6' => CMD_CH.send(LowPowerCmd::Sleep).await,
+            _ => { print_menu().await; continue; }
+        }
+    }
+}

semestralka_2_uart/src/sleep/mod.rs

@@ -2,3 +2,7 @@
 
 pub mod standby;
 pub mod shutdown;
+pub mod stop;
+pub mod sleep;
+
+pub use stop::StopEntry;

semestralka_2_uart/src/sleep/sleep.rs

@@ -0,0 +1,19 @@
+// src/sleep/sleep.rs
+
+use cortex_m::Peripherals;
+
+#[derive(Clone, Copy, Debug, defmt::Format)]
+pub enum SleepEntry {
+    Wfi,
+    Wfe,
+}
+
+pub fn enter_sleep_mode(entry: SleepEntry) {
+    let mut core = unsafe { Peripherals::steal() };
+    core.SCB.clear_sleepdeep();
+
+    match entry {
+        SleepEntry::Wfi => cortex_m::asm::wfi(),
+        SleepEntry::Wfe => cortex_m::asm::wfe(),
+    }
+}

semestralka_2_uart/src/sleep/standby.rs

@@ -9,7 +9,7 @@ pub fn enter_standby() -> ! {
         HAL_PWR_EnterSTANDBYMode();
     }
     
-    cortex_m::asm::udf(); // never happen marker
+    cortex_m::asm::udf();
 }
 
 pub fn enter_standby_with_sram2_8kb() -> ! {

semestralka_2_uart/src/sleep/stop.rs

@@ -0,0 +1,69 @@
+// src/sleep/stop.rs
+
+use cortex_m::Peripherals;
+use cortex_m::asm;
+
+/// Enter STOPx mode parameter
+#[derive(Debug, Clone, Copy, PartialEq, Eq, defmt::Format)]
+pub enum StopEntry {
+    Wfi,
+    Wfe,
+    WfeNoEventClear,
+}
+
+impl From<StopEntry> for u8 {
+    fn from(value: StopEntry) -> Self {
+        match value {
+            StopEntry::Wfi => 0x01,
+            StopEntry::Wfe => 0x02,
+            StopEntry::WfeNoEventClear => 0x03,
+        }
+    }
+}
+
+pub fn enter_stop0() {
+    unsafe extern "C" {
+        fn rust_LL_PWR_SetPowerMode(mode: u32);
+    }
+
+    const LL_PWR_STOP0_MODE: u32 = 0; //stm32u5xx_ll_pwr.h
+
+    unsafe {
+        rust_LL_PWR_SetPowerMode(LL_PWR_STOP0_MODE);
+
+        let mut core = Peripherals::steal();
+        core.SCB.set_sleepdeep();
+        asm::wfi();
+        core.SCB.clear_sleepdeep();
+    }
+}
+
+pub fn enter_stop1(entry: StopEntry) {
+    unsafe extern "C" {
+        fn HAL_PWREx_EnterSTOP1Mode(entry: u8);
+    }
+
+    unsafe {
+        HAL_PWREx_EnterSTOP1Mode(entry.into());
+    }
+}
+
+pub fn enter_stop2(entry: StopEntry) {
+    unsafe extern "C" {
+        fn HAL_PWREx_EnterSTOP2Mode(entry: u8);
+    }
+
+    unsafe {
+        HAL_PWREx_EnterSTOP2Mode(entry.into());
+    }
+}
+
+pub fn enter_stop3(entry: StopEntry) {
+    unsafe extern "C" {
+        fn HAL_PWREx_EnterSTOP3Mode(entry: u8);
+    }
+
+    unsafe {
+        HAL_PWREx_EnterSTOP3Mode(entry.into());
+    }
+}

semestralka_2_uart/src/wakeup/gpio.rs

@@ -0,0 +1,25 @@
+// src/wakeup/gpio.rs
+
+use defmt::info;
+use embassy_stm32::exti::ExtiInput;
+use embassy_stm32::gpio::Pull;
+use embassy_stm32::peripherals;
+use embassy_time::{Duration, Timer};
+use embassy_hal_internal::Peri;
+
+/// GPIO pin as an EXTI wake-up source.
+#[embassy_executor::task]
+pub async fn gpio_wakeup(
+    pin: Peri<'static, peripherals::PA0>,
+    ch: Peri<'static, peripherals::EXTI0>
+) {
+    info!("EXTI wake input on PA0");
+    let mut btn = ExtiInput::new(pin, ch, Pull::Up);
+
+    loop {
+        info!("Waiting for falling edge on PA0");
+        btn.wait_for_falling_edge().await;
+        info!("GPIO wake-up");
+        Timer::after(Duration::from_millis(50)).await;
+    }
+}

semestralka_2_uart/src/wakeup/iwdg.rs

@@ -10,13 +10,8 @@ use crate::sleep::standby;
 
 use crate::config::WATCHDOG_TIMEOUT_US;
 
-/// Clears system reset and standby flags after wakeup.
+/// Call early in startup 
 ///
-/// Call early in startup to:
-/// - Clear reset flags by setting `RMVF` in `RCC_CSR`.
-/// - If `SBF` in `PWR_SR` is set (woke from Standby), clear it.
-///
-/// # Registers
 /// - `RCC_CSR` — Reset and Clock Control / Status
 /// - `PWR_SR` — Power Control / Status
 pub fn clear_wakeup_flags() {
@@ -37,13 +32,10 @@ pub fn clear_wakeup_flags() {
     }
 }
 
-/// Initializes the Independent Watchdog (IWDG) timer.
-/// Wakeup source: Can wake the system from Standby mode on timeout
-///
-/// # Timing
-/// - Timeout value is configured in `WATCHDOG_TIMEOUT_US` from config.rs
-pub async fn init_watchdog_reset(iwdg: Peri<'_, peripherals::IWDG>) {
-    info!("Initializing watchdog after watchdog wake...");
+/// Init Independent Watchdog (IWDG) timer.
+/// Timeout value is configured in `WATCHDOG_TIMEOUT_US` from config.rs
+pub async fn init_watchdog_reset(iwdg: Peri<'static, peripherals::IWDG>) {
+    info!("Init watchdog after watchdog wake...");
     let mut watchdog = IndependentWatchdog::new(iwdg, WATCHDOG_TIMEOUT_US);
     watchdog.unleash();
     Timer::after(Duration::from_millis(10)).await;

semestralka_2_uart/src/wakeup/mod.rs

@@ -1,3 +1,4 @@
 // src/wakeup/mod.rs
 
 pub mod iwdg;
+pub mod gpio;