improved parsing of software uart

semestralka_1i_rx_dma/src/software_uart/uart_emulation.rs

@@ -115,53 +115,85 @@ pub fn decode_uart_samples(
     let frame_bits = 1 + nbits + parity_bits + stop_bits_count;
     let frame_len = frame_bits * ovs;
 
+    // Helper: Majority vote over 3 samples centered at `i`
+    let get_bit = |i: usize| -> u8 {
+        let mut votes = 0;
+        // Check i-1, i, i+1. Saturating sub/add handles boundaries roughly.
+        if i > 0 && samples.get(i - 1).map_or(true, |&x| x != 0) {
+            votes += 1;
+        }
+        if samples.get(i).map_or(true, |&x| x != 0) {
+            votes += 1;
+        }
+        if samples.get(i + 1).map_or(true, |&x| x != 0) {
+            votes += 1;
+        }
+
+        if votes >= 2 {
+            1
+        } else {
+            0
+        }
+    };
+
     // We loop while we have enough remaining samples for a full frame
     while idx + frame_len <= samples.len() {
         // Wait for falling edge (High -> Low)
         // samples[idx] == 1 (Idle/Stop) && samples[idx+1] == 0 (Start)
         if samples[idx] != 0 && samples[idx + 1] == 0 {
-            
             // Align to center of START bit
             // Start bit begins at idx+1. Center is at idx + 1 + (ovs/2)
             let center_offset = 1 + (ovs / 2);
             let mut scan_idx = idx + center_offset;
 
-            // Sanity check: is the middle of the start bit actually 0?
+            // 1. Validate Start Bit (Must be 0)
-            if samples.get(scan_idx).copied().unwrap_or(1) != 0 {
+            if get_bit(scan_idx) != 0 {
-                idx += 1;
+                idx += 1; // False start (noise), move on
                 continue;
             }
 
             // Move to center of first data bit
             scan_idx += ovs;
 
-            // Sample data bits
+            // 2. Read Data Bits
             let mut data: u8 = 0;
             for bit in 0..nbits {
-                let bit_val = samples
+                if get_bit(scan_idx) == 1 {
-                    .get(scan_idx)
+                    data |= 1 << bit;
-                    .map(|&b| if b != 0 { 1u8 } else { 0u8 })
+                }
-                    .unwrap_or(1); // Default to high if out of bounds (shouldn't happen)
-                data |= bit_val << bit;
                 scan_idx += ovs;
             }
 
-            // Parity: skip
+            // 3. Skip Parity (if any)
-            match cfg.parity {
+            if cfg.parity != Parity::None {
-                Parity::None => {}
-                Parity::Even | Parity::Odd => {
                 scan_idx += ovs;
             }
+
+            // 4. Validate Stop Bit (Must be 1)
+            // If stop bit is 0, it's a framing error. We reject the whole byte.
+            if get_bit(scan_idx) == 0 {
+                idx += 1; // Try to find a real start bit on the next sample
+                continue;
             }
 
-            // We successfully read a byte. 
+            // 5. Byte is valid
-            // Advance main `idx` past this frame.
-            // We processed `frame_len` samples starting from `idx` (which was the idle bit before start).
-            // Actually, to be precise, we should advance by roughly the frame length.
-            idx += frame_len;
-            
-            // If overflow happens in push (unlikely given 256 limit), ignore
             let _ = out.push(data);
+
+            // 6. Active Resync: Fast-forward through the stop bit(s) and idle time
+            // scan_idx is currently at the center of the Stop bit.
+            idx = scan_idx;
+            // Advance while we are reading High (1).
+            // As soon as we see Low (0), we stop. That 0 is the beginning of the NEXT start bit.
+            // The outer loop expects `idx` to be the High *before* the start bit, so we will handle that.
+            while idx < samples.len() && samples[idx] != 0 {
+                idx += 1;
+            }
+            // Back up one step.
+            // The outer loop logic is: `if samples[idx] != 0 && samples[idx+1] == 0`.
+            // If we stopped at `idx` because it was 0, then `idx-1` was the last 1 (Idle).
+            if idx > 0 {
+                idx -= 1;
+            }
         } else {
             // No start bit detected here, move to next sample
             idx += 1;