finished and fully functional

semestralka_1_connected/src/bin/main.rs

@@ -3,47 +3,46 @@
 #![no_main]
 
 use defmt::*;
+use core::cell::RefCell;
+use cortex_m::interrupt::Mutex;
 use embassy_executor::Spawner;
-use embassy_time::Instant;
+use embassy_futures::yield_now;
-use embassy_stm32::dma::Request;
+use embassy_sync::{
-use embassy_stm32::gpio::{Input, Output, Level, Pull, Speed};
+    blocking_mutex::raw::CriticalSectionRawMutex,
+    channel::Channel,
+    pipe::Pipe,
+};
+use embassy_time::{Duration, Instant, Timer};
+use embassy_stm32::{
+    bind_interrupts,
+    dma::Request,
+    gpio::{Input, Level, Output, Pull, Speed},
+    interrupt,
+    pac,
+    peripherals,
+    rcc::{self, Pll, PllDiv, PllMul, PllPreDiv, PllSource, Sysclk},
+    usart::{BufferedInterruptHandler, BufferedUart, Config},
+    Config as CPUConfig,
+};
+use static_cell::StaticCell;
+use dma_gpio::config::{
+    BAUD, PIPE_HW_RX, PIPE_HW_TX, PIPE_INT_RX, PIPE_INT_TX, PIPE_SW_RX,
+    PIPE_SW_TX, RX_OVERSAMPLE, RX_RING_BYTES, TX_OVERSAMPLE, TX_RING_BYTES,
+    UART_CFG,
+};
+use dma_gpio::hw_uart_pc::{driver::uart_task, usart1};
+use dma_gpio::hw_uart_internal::{
+    driver::uart_task as uart_task_internal,
+    usart2,
+};
 use dma_gpio::software_uart::{
+    debug::dump_tim6_regs,
+    decode_uart_samples,
     dma_timer::{init_tim6_for_uart, init_tim7_for_uart},
     gpio_dma_uart_rx::rx_dma_task,
-    debug::dump_tim6_regs,
+    gpio_dma_uart_tx::tx_dma_task,
 };
-use dma_gpio::config::{BAUD, RX_OVERSAMPLE, TX_OVERSAMPLE};
-use dma_gpio::config::{TX_RING_BYTES, RX_RING_BYTES};
-use dma_gpio::software_uart::gpio_dma_uart_tx::tx_dma_task;
-use static_cell::StaticCell;
-use embassy_futures::yield_now;
-use dma_gpio::hw_uart_pc::usart1;
-use dma_gpio::hw_uart_pc::driver::uart_task;
-use embassy_stm32::usart::{BufferedUart, Config, BufferedInterruptHandler};
-use embassy_stm32::peripherals;
-use embassy_stm32::bind_interrupts;
-use embassy_stm32::Config as CPUConfig;
-use dma_gpio::config::{PIPE_HW_TX, PIPE_HW_RX, PIPE_SW_TX, PIPE_SW_RX};
-use embassy_sync::{blocking_mutex::raw::CriticalSectionRawMutex, pipe::Pipe};
-use dma_gpio::hw_uart_internal::usart2;
-use dma_gpio::hw_uart_internal::driver::uart_task as uart_task_internal;
-use dma_gpio::software_uart::decode_uart_samples;
-use dma_gpio::config::UART_CFG;
-use dma_gpio::config::{PIPE_INT_TX, PIPE_INT_RX};
-use embassy_time::{Duration, Timer};
-use embassy_stm32::pac;
-use embassy_stm32::interrupt;
 use {defmt_rtt as _, panic_probe as _};
-use embassy_stm32::{
-    rcc::{self, Pll, PllSource},
-};
-use embassy_stm32::rcc::PllMul;
-use embassy_stm32::rcc::PllDiv;
-use embassy_stm32::rcc::PllPreDiv;
-use embassy_stm32::rcc::Sysclk;
-use cortex_m::interrupt::Mutex;
-use core::cell::RefCell;
-use embassy_sync::channel::Channel;
 
 static PD6_BITS: Channel<CriticalSectionRawMutex, u8, 16384> = Channel::new();
 
@@ -81,6 +80,8 @@ async fn main(spawner: Spawner) {
     let p = embassy_stm32::init(config);
     let f_tim7 = rcc::frequency::<embassy_stm32::peripherals::TIM7>().0;
     info!("TIM7 clock after PLL config = {} Hz", f_tim7);
+    let f_tim6 = rcc::frequency::<embassy_stm32::peripherals::TIM6>().0;
+    info!("TIM6 clock after PLL config = {} Hz", f_tim6);
 
     // HARDWARE UART to the PC
     let mut cfg = Config::default();
@@ -115,7 +116,7 @@ async fn main(spawner: Spawner) {
         Irqs2,
         cfg2,
     ).unwrap();
-    let _ = usart2::setup_and_spawn(BAUD);
+    let yield_period2 = usart2::setup_and_spawn(BAUD);
     spawner.spawn(uart_task_internal(uart2, &PIPE_INT_TX, &PIPE_INT_RX).unwrap());
     info!("USART2 ready");
     // END OF INTERNAL HARDWARE UART (USART2)
@@ -127,7 +128,6 @@ async fn main(spawner: Spawner) {
     // END OF USART1 <-> USART2 bridge 
 
     // SOFTWARE UART 
-    // let _rx = Input::new(p.PD6, Pull::Up);
     let rx_pin = Input::new(p.PD6, Pull::Up);
     unsafe { RX_PIN = Some(rx_pin) };
 
@@ -137,18 +137,15 @@ async fn main(spawner: Spawner) {
     init_tim7_for_uart(p.TIM7, BAUD, RX_OVERSAMPLE);
 
     dump_tim6_regs();
+    let bsrr_ptr = embassy_stm32::pac::GPIOB.bsrr().as_ptr() as *mut u32; // POZOR B REGISTER
+
+    spawner.spawn(tx_dma_task(p.GPDMA1_CH0, bsrr_ptr, SW_TX_RING.init([0; TX_RING_BYTES]), &PIPE_SW_TX).unwrap());
     // EDN OF SOFTWARE UART
 
 
-    // Allocate DMA RX ring buffer
     let rx_ring = SW_RX_RING.init([0u8; RX_RING_BYTES]);
-
-    // Pointer to GPIOD Input Data Register (IDR)
     let gpio_idr = embassy_stm32::pac::GPIOD.idr().as_ptr() as *mut u8;
-
-    // Spawn software UART RX DMA task
     spawner.spawn(rx_dma_task(p.GPDMA1_CH1, gpio_idr, rx_ring, &PIPE_SW_RX).unwrap());
-
     info!("SW UART RX DMA started");
 
     // Process decoded bytes coming from PIPE_SW_RX
@@ -156,7 +153,8 @@ async fn main(spawner: Spawner) {
     loop {
         let n = PIPE_SW_RX.read(&mut buf).await;
         if n > 0 {
-            info!("SW UART decoded: {:a}", &buf[..n]);
+            let _ = PIPE_SW_TX.write(&buf[..n]).await;
+            // info!("SW UART decoded: {:a}", &buf[..n]);
         }
         yield_now().await;
     }

semestralka_1_connected/src/software_uart/gpio_dma_uart_tx.rs

@@ -1,7 +1,7 @@
 // src/software_uart/gpio_dma_uart_tx.rs
 use embassy_executor::task;
 use embassy_stm32::{
-    dma::{Request, TransferOptions, WritableRingBuffer},
+    dma::{Request, Transfer, TransferOptions},
     peripherals::GPDMA1_CH0,
     Peri,
 };
@@ -32,40 +32,23 @@ pub async fn encode_uart_frames<'a>(
             break;
         }
 
-        // cooperative async yield
         yield_now().await;
     }
     offset
 }
 
-/// TX DMA task: encodes UART frames and sends them via DMA at TIM6 rate
 #[task]
 pub async fn tx_dma_task(
-    ch: Peri<'static, GPDMA1_CH0>,
+    mut ch: Peri<'static, GPDMA1_CH0>,
-    register: *mut u32, // Either odr or bsrr
+    register: *mut u32, // GPIOx_BSRR
-    tx_ring_mem: &'static mut [u32],
+    _tx_ring_mem: &'static mut [u32],
     pipe_rx: &'static Pipe<CriticalSectionRawMutex, 1024>,
 ) {
-    let mut tx_opts = TransferOptions::default();
+    info!("TX DMA task ready (One‑shot)");
-    tx_opts.half_transfer_ir = true;
-    tx_opts.complete_transfer_ir = true;
-
-    // SAFETY: tx_ring is exclusive to this task
-    let mut tx_ring = unsafe {
-        WritableRingBuffer::new(
-            ch,
-            TIM6_UP_REQ,
-            register,
-            tx_ring_mem,
-            tx_opts,
-        )
-    };
-
-    tx_ring.start();
-    info!("TX DMA ring started");
 
     let mut frame_buf = [0u32; 4096];
     let mut rx_buf = [0u8; 256];
+    let tim6 = embassy_stm32::pac::TIM6;
 
     loop {
         let n = pipe_rx.read(&mut rx_buf).await;
@@ -76,9 +59,33 @@ pub async fn tx_dma_task(
 
         let used = encode_uart_frames(TX_PIN_BIT, &rx_buf[..n], &mut frame_buf).await;
         if used > 0 {
-            let _ = tx_ring.write_exact(&frame_buf[..used]).await;
+            // Align arming to a clean TIM6 update boundary:
+            // 1) clear any pending UIF
+            tim6.sr().write(|w| w.set_uif(false));
+            // 2) wait for the next UIF (next bit tick)
+            while !tim6.sr().read().uif() {
+                yield_now().await;
+            }
+            // 3) clear UIF so first DMA beat happens on the FOLLOWING tick
+            tim6.sr().write(|w| w.set_uif(false));
+
+            let mut tx_opts = TransferOptions::default();
+            tx_opts.half_transfer_ir = false;
+            tx_opts.complete_transfer_ir = true;
+
+            unsafe {
+                let transfer = Transfer::new_write(
+                    ch.reborrow(),
+                    TIM6_UP_REQ,
+                    &frame_buf[..used],
+                    register,
+                    tx_opts,
+                );
+                transfer.await;
+            }
         }
-        info!("tx_dma_task wrote {} words", used);
+
+        // info!("tx_dma_task sent {} words", used);
         yield_now().await;
     }
 }

semestralka_1j_tx_dma/src/bin/main.rs

@@ -104,7 +104,7 @@ async fn main(spawner: Spawner) {
     ).unwrap());
     // END OF SOFTWARE UART
 
-    let mut buf = [0u8; 32];
+    // let mut buf = [0u8; 32];
     let mut counter: u32 = 0;
 
     loop {